Below you will see some photos that I have selected to help you with your project. This is the one that you should replace with the dimmer. Hot Network Questions.
Replacing a Switch with a Dimmer Switch Hi i'm trying to wire in a dimmer switch. The old dimmer only has 1 line and 1 load on it and there are only 2 wires in the wall red and blue. Pre wire Dimmer Switches Most 3-Way dimmers come with pre-wired leads that are color coded and explained below. Beginner to Intermediate.
Brian Brian 51 1 1 3. Green, two Red and a Black Lead ready for installation.
With a few tools and your handy wiring diagram, you can add a custom lighting solution to any room in your house. You will need to locate the ground wire and connect that to the switch as well.
The 3 way must be at either end of the switch legs, whatever it takes. You can have several 4-way switches in a circuit, so long as you have two 3-ways at either end. Before you put up your tools and tidy the work area, you need to make sure that the lights work from both light switches. Regular 3-way dimmer switches are designed for incandescent lamps unless otherwise stated. Join the Discussion - Ask Your Question!
This combo type switch is normally used to control a ceiling fan and light. As you describe, the switch on the dimmer was not sufficient to toggle the load state. If you want to install a dimmer, I'd buy a Lutron 3-way dimmer at a compatible wattage for the load.
Scivitri Scivitri 1,468 9 21 28. Basic 3-Way Dimmers Switches A 3-way dimmer switch is very similar to a regular 3-way toggle switch except for the electronic unit which performs the actual dimming function.
Care should be taken in selecting your dimmer switch. Some fixtures allow you to use regular dimmers, however some do not. Wiring a 3 Way Dimmer Switch.
Files are available under licenses specified on their description page. He seems to be knowledgeable, so the switch legs are probably run non-intuitively.