This product may cause etching, be prepared to re-polish. Last Modified on January 21st, 2014. What do you use to remove black marker ink from your white marble floor?Wood Stain Removal From looseendsyarnshop.com
Clean area thoroughly with cold water and a good detergent Dawn dish soap or Stone soap. Allow the poultice to dry thoroughly, usually about 24 to 48 hours.
If the coating is solvent based waxes, urethane, epoxy Strip with a commercial paint stripper containing methylene chloride. Prepare the poultice. Once a green marble tile warps it is difficult to repair. If the rust is new try apply a solution of "Iron-Out" available at home centers and water.
Agitate with a cloth and rinse with clean water. Problem Coloring and proteins in these sauces can be extremely difficult to remove. If the stone lightens than there is a wax or dye on the stone. If the stone has been waxed or colored with dyes the ring may have cleaned the wax or dyes from the surface.
Seek professional help if this is the case or replace the stone. Remove the plastic cover and check to see if the paste has dried. If deposits are large try scrapping off excess deposits with a sharp razor blade.
Stain removal can be very difficult, and care must be taken when using a poultice. If stain is still not removed then poultice with powder diatomaceous earth or similar powder and an alkaline grease remover.
It also may give the stone a plastic like look. Clean the stained area with denatured alcohol and a clean white cloth.
Blot the area with Denatured alcohol and a clean white cloth. Once all heavy build-up is removed clean with acetone and a green scrub pad. An application of color enhancer may cosmetically darken the area to help hide the discoloration.
Problem Not as difficult to remove as oil based paints but can still cause serve headaches trying to remove. Type Baby lotion, body, suntan and hair oil, etc. Slate is a metamorphic stone made from layers of compressed mud.